MuCell Microcellular Foaming Solutions for Engineered Plastic Parts

Improved Quality & Lower Costs

Injection Molding

TecoCell® H1 is a chemical foaming and nucleation system targeted for use with polyolefin and polystyrene materials to provide assistance to the injection molding process with attributes including:

Lower melt viscosity

Faster cycle times

Lighter parts

Lower clamping pressures

Lower molded in stress

Better dimensional stability

Elimination of sink marks

Elimination of voids in thick sections

Larger process window

Equipment:

Although TecoCell can be run on a typical injection molding machine if the nozzle is adjusted to a lower temperature, it is recommended to use a shut off nozzle and a tool with either a cold runner system or a valve gate to prevent drool.

Click here for the product Data Sheet

 

TecoCell H1 is a specially formulated concentrate that is recommended for foaming polyolefins and polystyrene, and, nucleation of these polymers when foamed with physical blowing agents. This product activates at temperatures above 400˚F. The product is targeted for applications where the smallest cell size achievable with a CFA is required. Click here for the TecoCell H1 Product Information.

For the TecoCell H1 Safety Data Sheet - click here.

 

TecoCell GT is a specially formulated concentrate that is recommended for foaming PET, PETg, Nylon, PLA and other high temperature processing polymers. TecoCell GT activates at temperatures above 400˚F. The product is targeted for applications where the smallest cell size achievable with a CFA is required. Click here for the TecoCell GT Product Information.

For the TecoCell GT Safety Data Sheet - click here.

 

Click here for Questions and Answers Regarding Trexel’s Decision to Offer TecoCell®, a Chemical Foaming Agent to its Customers